Where is the OBD port on a 2018 Toyota Camry?
Under the dashboard, driver side
easy to reach · ISO 15765-4 CAN, 500 kbit/s
Under the driver-side dashboard, left of the steering column and above the pedals. Sit in the driver seat and look up toward the bonnet release lever; the connector faces downward roughly a hand width to the left of it.
| Protocol | ISO 15765-4 CAN, 500 kbit/s |
|---|---|
| Access | easy |
| Cover | No cover |
Pin-out
Pin 16 carries battery voltage with the ignition off, so a scanner powers up before the key is turned.
If you cannot find it
The connector faces downward and is often easier to find by feel than by looking. Where it is not in the position described above, check behind the ashtray, inside the centre console, or beside the interior fuse panel. It is always within reach of the driver’s seat, by regulation.
Other specifications for this vehicle
Last verified 2026-03-14 · Sources: 2018 Camry Repair Manual, engine and emission control section (Toyota Motor Corporation)
Specifications are provided for reference. Where your vehicle carries a placard or label with different figures, the label on your vehicle takes precedence.