2018 Toyota Camry oil capacity & type
4.6 L (4.9 qt)
with filter change · 0W-16
| Capacity (with filter) | 4.6 L (4.9 qt) |
|---|---|
| Capacity (drain only) | 4.3 L (4.5 qt) |
| Viscosity | 0W-16 |
| Specification | API SN, ILSAC GF-5 |
| Filter part number | 04152-YZZA1, 04152-31090 |
| Drain plug torque | 40 Nm (29.5 lb-ft) |
| Service | Interval |
|---|---|
| Normal | 16000 km (9941.9 mi) or 12 months |
| Severe service | 8000 km (4971 mi) |
Toyota specifies 0W-16 for fuel economy. Where 0W-16 is unavailable, 0W-20 may be used and should be replaced with 0W-16 at the next service.
What counts as severe service
Severe service covers mostly short trips, frequent stop-start driving, sustained extreme temperatures, towing, and dusty conditions. That describes a great deal of ordinary driving, so check the shorter interval before assuming the standard one applies.
The capacity figure assumes the filter is replaced at the same time. Refilling to the without-filter figure after changing the filter leaves the engine low.
Other specifications for this vehicle
Last verified 2026-03-14 · Sources: 2018 Camry Repair Manual, engine and emission control section (Toyota Motor Corporation)
Specifications are provided for reference. Where your vehicle carries a placard or label with different figures, the label on your vehicle takes precedence.